DAIKIN RP15C11H-15-30 Rotor Pump

Locking device:MS 31/710; Hydraulic nut:HMV 142E; G2:G 1/8; B5:135 mm; G3:13 mm; B1:467 mm; B:106 mm; G:Tr 710x7; d1:670 mm; A:8 mm;

B:70 mm; Permissible sliding velocity v max.:5 m/s; Specific dynamic load factor K:10 N/mm²; Tolerance shaft:h8; d:55 mm; Tolerance housing:H7; Permissible sliding velocity v min.:0.25 m/s; Specific static load factor K0:20 N/mm²; Mass bushing:0.41 kg; Coefficient of friction µ min.:

Basic Static Radial Load Rating Co:44000 N; Grease Speed Rating Open/Shielded n1:4000 rpm; d:110.000 mm; Oil Speed Rating Open/Shielded n2:4800 rpm; Sealed Speed Rating n3:2500 rpm; Basic Dynamic Radial Load Rating C:43600 N; D:150.0000 mm; Accessories:Without Accessories; Fillet Radius ra:1.00 mm;

L:125 mm; s1:25.4 mm; Fatigue load limit Pu:0.655 kN; Bearing:YAR 207-104-2RFGR/HV; End cover:ECL 207; L1:76 mm; A:34 mm; G1:21 mm; A5:28.2 mm; Hexagonal key size for grub screw N:3.969 mm;

H2:79.375 mm; Cap bolt recommended tightening torque:1735.4 N·m; Labyrinth ring:2 x LOR 156; P180°:160 kN; Stabilizing ring:SR-38-32; Mass pillow block:223 kg; R1:120.65 mm; da:177.8 mm; Housing:SSAFS 538; S:4.763 mm;

D:130.0000 mm; Accessories:Two Shields & Snap-R; Basic Static Radial Load Rating Co:95000 N; Sealed Speed Rating n3:3400 rpm; Oil Speed Rating n2:4500 rpm; Basic Dynamic Radial Load Rating C:121000 N; Fillet Radius ra:2.00 mm; B:57.20 mm; d:60.000 mm; Grease Speed Rating n1:3400 rpm;

Mass bearing:47.8 kg; b:9.1 mm; D:280 mm; d1 ≈:174 mm; d:110 mm; Fatigue load limit Pu:125 kN; K:6; C:128 mm; Basic static load rating C0:1060 kN; Maximum dynamic radial loads Fr max.:900 kN;

Basic Dynamic Radial Load Rating C:44200 N; d:80.000 mm; Grease Speed Rating Open/Shielded n1:4800 rpm; D:135.0000 mm; Oil Speed Rating Open/Shielded n2:5900 rpm; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:39000 N; B:16.00 mm;

Initial grease fill:141.75 g; Labyrinth ring:2 x LOR 187; A2:41.275 mm; H2:47.625 mm; J1:53.975 mm; Stabilizing ring:SR-18-15; Cap bolt:2 x 5/8-11 UNC; Housing:SAW 518; Bearing:23218 CCK/W33; R2:27.781 mm;

Nut for removal:HM 3192; A:9 mm; G:Tr 460x5; G2:G 1/4; B1:242 mm; d1:420 mm; G1:30 mm; Hydraulic nut:HMV 92 E; Mass withdrawal sleeve:32 kg; B2:264 mm;

Limiting speed:3100 r/min; J max.:225.425 mm; H:144.463 mm; J1:47.625 mm; d2:101.6 mm; S:0.794 mm; A1:99.219 mm; Mass bearing unit:8.39 kg; Attachment bolt diameter G:15.875 mm; A:88.9 mm;

Basic Interchange FAF:207KLD; Basic Radial Load Rating-Static SCO:15300 N; Width - Outer Ring B0:17.0 mm; Fillet Radius ra:1.00 mm; Width - Overall B:21.0 mm; Basic Radial Load Rating-Dynamic DC:25500 N; Accessories:87000 Shield & Seal; d:35.000 mm; Old MRC Bearing Number:207FSF; D:72.0000 mm;

B4:12.598 mm; d:45 mm; B:11.379 mm; G:44.882 mm; Threads per inch:18; d1:34.925 mm; Lock nut:N 09; d3 max.:64.414 mm; Lock washer:W 09; Mass adapter sleeve assembly:0.32 kg;

α:7 °; d4 ≈:35 mm; Specific dynamic load factor K:300 N/mm²; r1 min.:0.6 mm; h1:94 mm; d:25 mm; l7 min.:30 mm; l3 min.:36 mm; dk:35.5 mm; l5 ≈:18 mm;

d1:190 mm; D:340 mm; G:Tr 210x4; Calculation factor Y0:1.6; Da max.:326 mm; K:6 mm; Reference speed:1000 r/min; B:140 mm; Basic dynamic load rating C:1865 kN; Mass bearing + sleeve:57.5 kg;